Plus, the easiest places to press to get them to work, are in the centers of the controls. See the volume buttons, circled in yellow, in the next picture. They lower and raise the speaker loudness. These controls are shaped as large minus and plus symbols, They are cyan colored on our speaker. What wireless speaker doesn’t? Find these on the front. The Wonderboom 2 has volume controls too. Upon doing that, your source device advances to the next song in the current playlist. To advance to the next song, quickly press and release the Play-Pause button twice.Move Ahead in a Playlistįinally, you can skip forward to the next song in a playlist with the Play-Pause button on the Wonderboom 2. Press and release again to resume playback. Quickly press near the center of the top island to stop audio play. The center button on the top of the Wonderboom 2. But you can find its outline in the center of the speaker top as we show in the next photo. Again, it only lights prior to pairing, in discovery mode, and for a brief time after you establish pairing. Note though that the pairing button does not light up unless the speaker actually pairs with a device. It then stays OFF as long as the wireless connection continues. Then, it switches OFF to save battery power.

This indicates that pairing was successful. The light then glows a steady white for several seconds.

Then after the speaker connects, it stops flashing. When speaker is in pairing mode, this button rapidly flashes white. This allows nearby devices to find it and connect. When in this mode, the speaker sends its name and other connection info over the BT radio spectrum. This places the speaker into pairing / discovery mode. With the speaker turned on, press the Bluetooth button for one to two seconds, then release. This is the smaller of the two raised panel buttons. Next, we have the Bluetooth discovery mode button, as highlighted in the next picture. This means that it’s time to put the BT speaker on the charge before it shuts off all the way. The speaker powered ON, with its -Power-button glowing.īut when the battery falls to too-low status, this lamp glows solid red. When the speaker is ON, and the battery has at least a little charge, this lamp glows solid white. Top view of the Wonderboom 2 Bluetooth speaker. This button also contains an LED that shows power and battery status. Wonderboom 2 Buttons: Detailed Descriptions of Each The Power Buttonįirst off, the Power button switches the unit ON and OFF. It blinks when the speaker is in pairing mode, and glows steadily when a pairing is active. It changes color too when the battery is low.įinally, we also find a lamp in the Bluetooth button that shows BT pairing status. Then also it flashes to show speaker charging going on or pairing mode active. The status lamp in the Power button glows in one color during normal operation. There are also two lamps in the top buttons. Plus, there’s one USB port on the back behind a water tight cover.

The Wonderboom 2 has five buttons on the top and front.

And we show where they are on the speaker with many pictures. We give button functions, meanings, and codes and combinations to press for the various functions. In this Wonderboom 2 buttons guide, we detail all the buttons, ports, and lamps on the speaker.

Ue boom 2 battery